Rapid digitalization, new legal frameworks – such as the EU GDPR – and increasingly flexible working (time) models: a mechanical locking system can no longer keep up with such increasingly complex requirements. Modern, secure and flexible locking now works digitally – ideally with a state-of-the-art access control system that is equipped with self-sufficient fitting systems (battery-operated electronic handle systems or cylinders). These make the complex cabling of access points unnecessary and save the operator considerable costs because they can also be used in existing buildings without any problems. Access authorizations for person, time and location (“who – when – where”) are determined centrally via a system platform and these are implemented at the access points using identification media (personally carried cards, transponders, key fobs) or biometric scans (finger, face). In this way, employees can only move in the areas of buildings or protected areas that are approved for them. Access authorizations can be limited in time (through expiry periods or set times) and the movements of those authorized can be logged via the access points.

Identification media are differentiated according to the type of function and application:

Active = contactless identification media, e.g. B. in the form of transponders, handheld transmitters, mobile phones that actively send coded signals to the locking system via radio or Bluetooth.

Passive = contact-based identification media, e.g. in the form of smart cards or key fobs, but also mobile phones, which are activated via RFID technology by a reader that reads coded signals from them.

Biometric = contactless scanning of specific body parts (hand, fingers, face) using intelligent sensors that compare their current scan results with already stored reference data.

How the access control system works:

If authorized, an actuator (drive element) is activated and the lock is released. The head office either makes this decision itself based on the available data (offline system) or forwards the request to a higher authority and receives a response from it (online system). Access control systems are usually controlled either centrally or decentrally, but mixed forms are also possible. With the central arrangement, all sensors (readers) and actuators (door openers, locks, etc.) are connected to the access control center, which is usually in a secure area, e.g. B. a technical room is housed.

In the greater Luxembourg region, we are the only Premium Plus partner of SALTO Systems, one of the world’s leading manufacturers of access control systems in passive technology.

With SALTO for more security and flexibility:
The unique wireless electronic door fittings and cylinders (XS4 Wireless System) from SALTO Systems are suitable for a wide range of access applications. Combined with the patented data-on-card technology (SALTO Virtual Network, SVN), customized centrally controlled access solutions can be implemented without laying cables.

The special features of SALTO systems:

• Compatible with the most common RFID technologies
• Compatible with leading threat management systems (Physical Security Information Management Systems, PSIM)
• Highest reliability thanks to internal development, in-house production and comprehensive quality management
• Open architecture and standardized interfaces allow seamless integration with other disciplines
• Future-proof thanks to easy scalability
• High expertise in the integration of virtual networks
• Continued use of existing identification media and compatibility with other systems thanks to multi-application.

We will be happy to provide you with further information upon request – or let our security experts provide you with comprehensive advice at our offices or at your location!

In the greater Luxembourg region, we are a system partner (i.e. specialist for individual products and networking technology) of SimonsVoss, the world’s leading manufacturer of electronic cylinders with active technology. This means we can offer you extensive services relating to the SimonsVoss product range as well as a 5-year manufacturer’s guarantee on all electronic locking components.
SimonsVoss, the pioneer of radio-controlled, wireless locking technology, offers system solutions with a wide range of products for the SOHO (small/home office), medium and large companies and public institutions. SimonsVoss locking systems combine intelligent functionality, high quality and award-winning design “made in Germany”. As an innovative system provider, SimonsVoss values ​​scalable systems, high security, reliable components, powerful software and easy operation. This makes SimonsVoss a technology leader in digital locking systems. Courage to innovate, sustainable thinking and action as well as high appreciation of employees and partners are the basis of economic success. SimonsVoss is a company in the ALLEGION Group – a global security network that is represented in around 130 countries worldwide (www.allegion.com).

The special features of SimonsVoss systems:

• More control and security through copy-proof electronic keys
• More convenience by opening and closing doors at the push of a button
• Unrestricted locking authority thanks to a central, digital identification instance
• Made in Germany, all components of the locking components come from Germany and are manufactured in-house under the highest quality standards
• Full investment security through upward and downward compatibility
• SimonsVoss locking systems are compatible with almost all common time recording and billing systems

We will be happy to provide you with further information upon request – or let our security experts provide you with comprehensive advice at our offices or at your location!

We are a partner of iLOQ, the first manufacturer of access management systems that generate the energy they need themselves.
iLOQ’s digital and mobile access management system with its own energy generation allows you to quickly manage keys and locking cylinders thanks to the cloud-based, user-friendly software. Access rights can be updated remotely immediately via a programming hotspot; the keys do not have to be changed in a central location. The iLOQ 5 series works without a battery and achieves a significantly longer maintenance-free service life than conventional battery-operated systems. The investment in the access control system from iLOQ pays for itself in a very short time.

The special features of iLOQ systems:

• Digital locking system iLOQ S5, ideal for residential and commercial buildings, the power is supplied by kinetic energy
• Comprehensive product family, suitable for every lock: e.g. lock cylinders, lever cylinders, padlocks…
• Mobile access management system iLOQ S50, particularly suitable for utility companies and real estate service providers, the power supply and the transfer of access rights takes place via the smartphone
• State-of-the-art security, tested and certified by security institutions
• Simplified management with cloud-based iLOQ Manager software
• Cost-saving in purchase and operation
• Digital locking systems for all requirements

We will be happy to provide you with further information upon request – or let our security experts provide you with comprehensive advice at our offices or at your location!

Europe’s No. 1 in fingerprint access solutions.

ekey net is a network-capable access control system for up to 80 fingerprint scanners. From the office entrance to the server room to the warehouse, you can manage all areas of a company centrally via a PC. Using user-friendly software, people are registered and assigned to freely definable user groups. ekey net offers a range of interfaces for connecting to third-party systems (e.g. building control, time recording, printer management, Wiegand sensors, etc.). With fingerprint access solutions with ekey, people are authorized directly, not the identification media they carry! Keys, cards and codes can be lost, forgotten or stolen – “The finger is always with you”. ekey offers a wide range of products with its finger scanners for doors, gates, alarm systems or time recording.

The special properties of ekey systems:

• Highest security:
  Impossible to lock yourself out, no lost or stolen keys, anti-counterfeit protection through life detection with RF sensor technology
• Ease of use:
  Easy installation and administration, up to 4 functions can be controlled per fingerprint
  (e.g. opening the door or gate, deactivating the alarm system, etc.)
• Intelligent software
  The ekey software learns with every use, detects the growth of children’s fingers and changes in user habits as well as minor injuries
• Interfaces for external connection
  e.g. for building control, time recording, printer management, Wiegand sensors etc.
• Cross-location management possible
• MADE IN AUSTRIA
  5 YEAR QUALITY GUARANTEE on all ekey products!

We will be happy to provide you with further information upon request – or let our security experts provide you with comprehensive advice at our offices or at your location!

Get ready for the age of access control with facial recognition from Hikvision!
Hikvision is one of the world’s leading providers of Internet of Things solutions with video as a core competency. The company is listed on the stock exchange and employs more than 40,000 people, of which over 19,000 work in research and development. Hikvision is therefore able to develop groundbreaking solutions that meet the diversity of market requirements and individual customer needs.

Contactless access control systems with a temperature monitoring function are a particularly effective solution, especially in Corona times, as they maximize the protection of employees and visitors. Compared to conventional access control and time recording devices with fingerprints or RFID identification media, Hikvision’s MinMoe terminals with facial recognition enable quick, almost undisturbed passage through the access points. In addition, the terminal achieves 99% accuracy even in low-light environments thanks to a deep learning algorithm.
Equipped with two lenses – visible light and infrared – Minmoe facial recognition only grants access if both lenses image the same person, thereby verifying that the face is actually “present”. This anti-spoofing technology makes access control management much more secure and thwarts most attempts at unauthorized intrusion.
In addition to the lock function, MinMoe facial recognition terminals can be connected to network video recorders for data recording and storage, as well as to network cameras that clearly record a situation when preset events occur. Hikvision MinMoe products now offer a wealth of third-party interfaces that provide comprehensive compatibility with customers’ installed door control and attendance systems, allowing MinMoe terminals to be integrated quickly and cost-effectively.

As a Platinum Partner of Hikvision Germany, i.e. H. As an authorized company with the highest level of expertise, we exclusively offer you all access control options via facial recognition in Luxembourg.

The special features of Hikvision systems:

• Face registration within 3 seconds and storage of up to 10,000 faces
• Possibility of importing facial images in JPG format
• Dual camera with infrared function, detects faces from a distance of 1 meter
• Recognizes live human faces and distinguishes them from images and videos
• Excellent performance in backlit, high light and low light environments
• 99% detection rate and meeting international standards for False Acceptance Rates (FAR) and False Rejection Rates (FRR)
• Supports authentication modes for face, fingerprint, RFID credentials, PIN password or a combination thereof
• Connection options for external card/fingerprint reader to enable bi-directional access control
• Advanced access control functions such as anti-passback (no re-entry without first exiting), linking and locking are adjustable
• Possibility of time recording
• Touchscreen user interface

We will be happy to provide you with further information upon request – or let our security experts provide you with comprehensive advice at our offices or at your location!